The Standard Blast Shield comes with a UV Shield, it is a Ceramic Based, High Heat, Pressure Rated Glass, but there is a slight “orange peel” effect.
The IR/UV Shield is the UV Shield with an Infrared (IR) coating on 1 side $39.00. Both of these are rated at 1800 degree. We Highly recommend upgrading to the IR/UV for More Protection.
You will need to Choose which Shield you want , and how Wide you want it to be 4" , 5" or 6" Wide. All of our Shield's are 6.5" Tall and there is no extra cost for this.
Note: The Blast Shield does not protect against Sodium-Flare; you will still need your Didymium Glasses.
The L-Marver is a Standard size of 3” Wide x 3” Length (2.5” working area) x 1.5” Height.
If you would like to make it a different Size. Please go to Marver Options , after adding the Marver to your Cart.
MAX LENGTH for a SSQ is 3" ( 2.5" working ) , DO NOT EXCEED THIS.
You will also need toChooseif you would like aQuick Release Pocket - $15
NO - means the Shield Assembly will be held on the back of the Marver with 2 screws.
YES - means the Shield Assembly will drop into the Quick Release Pocket to be easily removed.
There are also more options you can add to the Marver. Please go to Marver Options to see them all.
They Include - Marver Upgrade , Pivoting V-Blade , Pivoting Side Marver , Flat Side Marver , Punty Rest , Darby Corner , Plus more...........
This particular model has been designed around your specific torch (Manufacturer / Model). The solid aluminum mount sleeves over your torch barrel and clamps down securely, keeping your L-Marver and/or Shield solidly in place. You will need to remove the Blade if still present.